Strict quality control system and perfect after-sales service system are always our top concern which can guarantee and track the quality of our products from raw materials procurement, production processes, finish products as well as after-sales service.
Test:SGS or Third- party test
Delivery: 5-7days after deposit
| Differences between SPHE,SPHD, and SPHC | |
| Different references | SPHE: Hot rolled steel bar is the finished steel bar formed by hot rolling and cooled naturally |
| SPHD：Hot rolled strip, strip and sheet produced by hot rolling. | |
| SPHC：Hot rolled steel plate, straight hair coil after cutting head,cutting tail, cutting edge, straightening, leveling and other finishing line treatment, then cut plate or rewind. | |
| Different feature | SPHE:It is made of low carbon steel and ordinary alloy steel pressed under high temperature |
| SPHD: thickness in 1.2 ~ 8mm. Strips with widths below 600mm are called narrow strips, and strips with widths above 600mm are called wide strips. | |
| SPHC: add special elements (P, Cu, C, etc.), with good corrosion resistance and atmospheric corrosion resistance, used in the production of containers, special vehicles, but also used in building structures. | |
|
Chemical Parameters |
|||||
|
Grade |
C |
Si |
Mn |
P |
S |
|
SPHC |
≤0.15 |
≤0.05 |
≤0.60 |
≤0.035 |
≤0.035 |
|
SPHD |
≤0.10 |
≤0.05 |
≤0.50 |
≤0.035 |
≤0.035 |
|
SPHE |
≤0.10 |
≤0.05 |
≤0.50 |
≤0.030 |
≤0.035 |
|
Conventional Parameters |
|
|
Width |
500-3000 mm |
|
Thickness |
0.2-4 mm |
|
Tolerance |
±0.5% |
|
Alloy or Not |
None Alloy |
|
Processing Service |
Welding, Punching, Cutting, Bending, Decoiling |
|
Payment term |
T/T (30% Deposit) |
|
MOQ |
5Tons |
|
Packing |
Standard Sea-worthy Packing |
|
Standard |
EN,GB,ASTM,JIS,DIN,etc. |
1. SPHE: mainly used for reinforced concrete and prestressed concrete structure reinforcement, is one of the largest use of steel in civil engineering.
2. SPHD: used in automobile, motor, chemical, shipbuilding and other industrial sectors, but also as a blank for cold rolling, welding pipe, cold bending steel production. Hot strip rolling mill is the main equipment for producing hot strip, which has the advantages of high production efficiency, high output and good quality.
3. SPHC: mainly used in the production of steel structure parts, Bridges, ships and vehicles.
