Strict quality control system and perfect after-sales service system are always our top concern which can guarantee and track the quality of our products from raw materials procurement, production processes, finish products as well as after-sales service.
Test:SGS or Third- party test
Delivery: 5-7days after deposit
35SiMn alloy steel is used for medium speed manufacturing under quenching and tempering condition. Medium load parts; Or in the quenching. Tempering state used for high load and small impact parts, can also be used for large sections and need surface hardening parts.
|
chemical component |
||||||||
|
Grade |
C |
Si |
Mn |
Cr |
Cu |
Sb |
P |
S |
|
09CrCusb |
≤0.10 |
0.20-0.40 |
0.35-0.65 |
0.70-1.20 |
0.25-0.45 |
≤0.10 |
≤0.10 |
≤0.10 |
|
Mechanical Property |
||||
|
Grade |
Tensile |
Yield |
Elongation |
Reduction |
|
09CrCusb |
390-550 |
≥245 |
≥25 |
≥45 |
|
Conventional Parameters |
|
|
Width |
Plate: 600-2250mm |
|
Length |
1-12m |
|
Thickness |
0.3-250 mm |
|
Alloy or not |
Alloy |
|
Tolerance |
Cold rolling: ±0.02mm |
|
Processing Service |
Welding, Punching, Cutting, Bending, Decoiling |
|
Payment term |
T/T (30% Deposit) |
|
MOQ |
5Tons |
|
Packing |
Standard Sea-worthy Packing |
|
Standard |
AISI,ASTM,DIN,JIS,GB ,JIS,SUS,EN,etc |
The steel is used in the manufacture of transmission gears in the general machinery industry. Spindle. Mandrel. Rotating shaft. Connecting rod. Worm. Trolley shaft. Generator shaft. Crankshaft. Flywheel and small forgings; In the steam turbine manufacturing industry, the operating temperature is below 400℃. Spindle and hub with diameter less than 250mm, impeller with thickness less than 170mm and all kinds of important fasteners; In agricultural machinery to manufacture hoe shovel handle. Plough roll and other wear-resistant parts. This steel can completely replace 40Cr as tempering steel.
